Sunday, July 6, 2008

Research and Festivals



When I arrived at EPFL the project I am working on was struggling to function. We are developing hydrogels from Polydimethylsiloxide (PDMS) that will be used for microfluidics and studying stem cell progeny behavior. The PDMS formed into a square (by injecting the silicone into a mold) with sides of about 1/2". Small channels are molded into the face of the chip creating what could be described as a microscopic plumbing system. The channels range from 12 to 24 micrometers in diameter and are between 125 and 1000 micrometers long, depending on the chip, which means that all of our work is done under a microscope so we can actually look at these channels. I realize the description is fairly ambiguous, but I will post images so you can see when I'm at EPFL, I have none on my computer.
The channels are formed in a series of switchbacks winding parallel to each other. Near one end there are small "traps" notched out that act as shortcuts for the fluids to move through the channels. We will eventually be flowing solutions of stem cells in medium through the system and the cells will be caught individually in these traps.
Now I will explain the use/purpose of this. Generally when studying stem cell populations it is pretty much impossible to observe the variation in differentiation from one cell to the next since they are all cultured in clusters. This technique will be used to isolate the stem cells individually so you can observe each individual cells differentation and the daughter cell's lineage. This is important for really understanding the behavior of individual stem cells and signaling cues. So, the place where we are in the project is still analyzing the characteristics of our channels when fluids are flushed through them. We have had many problems with this so far, specifically with dust (or whatever type) particles. The traps in our channels are less than 12 micrometers wide, which means that any particle that happens to get into our PDMS will clog our plumbing and make our chip useless. We have been fighting this for about two weeks now and I have finally made some progress on cleaning the chips and making them more reliable. When I started, nearly every chip would clog before we could gather quantitative measurements. Now we are nearly at a 66% success rate. Hopefully this will continue to improve as I try new methods to clean and keep the chips sterile.
I promise, this will all make much more sense when I post a photo of the chip under the microscope haha.

So, until then, I will move onto the Swiss life.

Ouchy

Since I have been here I have spent a couple of weekends in Lausanne, going to ouchy to read by the lake and seeing festivals. Three weekends ago was the fete de la musique in lausanne. I spent the day listening to various types of music throughout the 36 different stages in the city. There was constantly music being played at every point in the city of every genre. Afterward, I went out and experienced the true nightlife of Lausanne and went out to a bar/dance club until closing time at 5:00 am. This is atypical of what I am used to, coming from Utah, since all bars and clubs are closed at 2:00 am at latest, some are earlier. There is also a much larger variety of music played in the clubs here compared to the clubs in Utah. I think I could get used to the night life in Switzerland :).


Last week I also took a trip to Heidelberg, Germany, which was absolutely amazing! I loved the city there and the geography, despite the absence of the Alps. This was my first time to Germany and it left a very good impression. I also took the time to go look at the old house where Mark Twain used to live, not far from the local castle. The city has probably five towering churches which were worth seeing and a beautiful library. The buildings were amazing, many of them being decorated with gold flakes. The castle was amazing, and home to the largest wine barrel in Germany (possibly Europe..?), complete with a dance floor on top of it. It was a beautiful city, which I highly recommend. It was really amazing being in a city which has been around longer than my country has existed haha.












This week marked the beginning of the Montreux Jazz Festival. Being a fan of Jazz music, I have found myself grinning for hours on end while listening to the musicians playing on the various stages. I will not be going to any of the concerts which are not free seeing as how the price of each ticket is over $200 in most cases. Aside from the music, there are booths of souvenirs and food for nearly a mile down a walkway, on the way toward Chateu de Chillon (which is worth seeing!!) if you go by foot from Montreux. There are people on the side playing music or painting, and are quite entertaining to observe. I watched some guys make complete paintings using spray paint and paper, no brushes... and they turn out incredibly good! The festival goes until the 19th of July, and I recommend going for at least one night! After the bands are done for the evening (around 12:30-1:00) DJ's take the stage at local clubs (like the MDH club and Montreux Jazz Cafe) and play music until 5:00 am. The first night out I stayed until they closed, last night I came back to Lausanne early (at 3:00) so i would be refreshed enough to go on a hike today in Noiraigue, which has some terrain that is supposed to resemble the grand canyon. Unfortunately, It was raining incredibly hard this morning so I decided not to go this weekend. Even now as I am typing this I can hear drums from the music festival which is simultaneously going on in Lausanne. Switzerland is quite the eventful place in the summer!!

2 comments:

ryanpei said...

How are you getting to Stuttgart? I was looking at Zurich's "Summer Vacation Deals" book and they have an offer for a roundtrip to Stuttgart from Zurich for 2+ people at 58 CHF each, good for 2 days, which is pretty decent. They also include tickets to the Mercedes Benz museum while there. So if that interests you and you don't already have other plans, I would be happy to go this weekend as well.

PS. On those PDMS chips, are you working in a clean-room fab? That may solve some of the dirt problem if you aren't.

ryanpei said...

and my email is rpei@ethz.ch if you would like to contact me more directly